Ozone Monitor on a Board™, Models OEM-106-L, -M, -MH, and -H
For Industrial Ozone Applications

Picture

For those who need to integrate their ozone monitor into a separate system such as an air pollution monitoring package, we offer the Model OEM-106 series where the entire ozone monitor is mounted on a single printed circuit board.  The liquid crystal display and power switch may be detached and mounted outside the customer's custom enclosure.  With the exception of our Personal Ozone Monitor (POM), this is the most compact UV-absorbance-based ozone monitor available on the market.  The Model OEM-106-L has been designated by the EPA as a Federal Equivalent Method (FEM): EQOA–0914–218. Choice of four different optical benches allows for four different ozone concentration ranges as summarized in the following table.

Specifications for Different Optical Benches

Model Range Resolution Precision & Accuracy
106-L 0-100 ppm 0.0001 ppm (0.1 ppb) Higher of 0.002 ppm (2 ppb) or 2% of reading
106-M 0-1,000 ppm 0.01 ppm Higher of 0.01 ppm or 2% of reading
106-MH 0-10,000 ppm (0-1 vol%) 0.1 ppm Higher of 0.05 ppm or 2% of reading
106-H 0-20 wt% O2 or Air
0-14 vol%		 0.01 wt%
0.01 vol%
 Higher of 0.01 wt% or 2% of reading

General Specifications

Measurement Principle UV Absorption at 254 nm, single beam
Measurement Interval 2 s
Data Averaging Options 10 s, 1 min, 5 min, 1 hr
Nominal Flow Rate ~1 Liter/min; Up to 20 L/min for Model OEM-106-H
Data Storage 32,736 lines (10 s avg. = 3.7 days; 5 min avg = 113 days)
Choice of Units ppb, ppm, pphm, µg m-3, mg m-3 (for Models OEM-106-L and OEM-106-M)
ppm, mg m-3 (for Model OEM-106-MH)
vol%, wt% air, wt% O2, g/m3, g/Nm3 (for OEM-Model 106-H)
Data Outputs USB, RS232, 0-2.5 V Analog, 4-20 mA, LCD Display
Power Requirements 100-240 V AC, 50/60 Hz
11-28 V DC, nominally 500 mA at 12 V, 6 watt (for Models OEM-106-L, -M, -MH)
11-28 V DC, nominally 325 mA at 12 V, 3.9 watt (for Model OEM-106-H)
Size 2.5 x 7 x 9 inches (6.4 x 17.8 x 22.9 cm)
Weight 2.8 lb (1.3 kg) (for Model OEM-106-L)
2.5 lb (1.1 kg) (for Models OEM-106-M and -MH)
2.9 lb (1.3 kg) (for Model OEM-106-H)

Features

  • Measurement based on UV absorption
  • Low maintenance
  • Low power consumption; can be battery operated
  • Internal data logger with real-time clock
  • 2-s measurement interval
  • On-board microprocessor with interactive menus includes data averaging options of 10 s, 1 m, 5 m and 1 hr
  • USB and RS-232 output of time/date, O3 concentration, internal temperature and pressure
  • Analog output (0-2.5 V and 4-20 mA) of ozone concentration in user-selected units
  • Two 2-level relays for control purposes (e.g., control of ozone source or turn warning light on and off)
  • Long-life pump (15,000 hr) for Models OEM-106-L, OEM-106-M and OEM-106-MH
Confused about which ozone monitor best suits your application?
  • Decision Tree: This will help you decide which ozone monitor is best for your application.
  • Comparison: See a table that compares the specifications of all of our ozone monitors.
  • Applications: The most suitable ozone monitors for different applications are discussed here.

Our Tech Note #001 compares the specifications of our Models 106-L, 202, 205, 211 and POM with other high precision ozone monitors (Thermo, Teledyne-API and Ecotech).